So yesterday I decided I'll be making another dildo. Just finished the model for it. That was the easy part. Now I'll start making the mold for it. I should get to the final result by the end of the week hopefully and I'll post more pictures once the project has been completed. Sorry the pics aren't that good btw.
Another model
- Thread starter Steph
- Start date
It's finaly done. The shipment for the materials I needed was delayed by more than a week unfortunately. I screwed up the coating a bit so it's not 100% even but it turned out just fine. I'm happy with the result and tested it and it was great. For some reason I can't upload the images here so here's a link to a google drive.
https://drive.google.com/drive/folders/1Cic1aV8rVarR6DtfQsmpj2CGpDN4v7GM?usp=share_link
Note: I also just finished another new project so there are a couple of pictures of that too there
https://drive.google.com/drive/folders/1Cic1aV8rVarR6DtfQsmpj2CGpDN4v7GM?usp=share_link
Note: I also just finished another new project so there are a couple of pictures of that too there
Last edited:
The first one has an insertible length of roughly 30cm and a max diameter of around 8 cm and the more alien looking one has an insertible length of roughly 34 cm and a max diameter of 6cm. I'm somewhat off though since I don't have any good instruments to measure. Point is, they're big ones.Looks sweet , I’d have some fun with it!
What are the dimensions?
I'd like to do that. Problem is I have no experience in how to sell and ship stuff. I can try to custom make something for you from scratch if you'd like me to.
The one I’ve been looking for if it exists would be about 3”-3 1/2” in diameter about 10-12” insertable maybe 2 1/2” “head or ball shape”slightly tapered with ripple rings down the shaft 3/4-1” “rings” kinda like the playschool stacking rings, kinda medium to softish firmness, maybe a blue or dark green marble finish. I’ve seen some similar to this but I don’t want to go less than 3”diameter. Thanks, Johnny